Errors reported with Release 20.1

***********************************************************************;
* (C) COPYRIGHT 2010, COMPUTER MANAGEMENT SCIENCES, INC.               ;
* ALL RIGHTS RESERVED.                                                 ;
***********************************************************************;

This member contains a log of the errors which were discovered with
CPExpert Release 20.1, and acknowledges the user who discovered the
error.   Thanks for reporting the errors!

DATE       MODULE     ERROR DESCRIPTION

05/05/10   WLMEVALF   Corrected test for SAS/ITRM PDB. Bad test caused improper
                      seetting of OBS64, which caused error if PDB did not have the
                      TYPE64 file.
                      Don Williams (UNC Hospitals, NC)

05/07/10   WLMPRSML   Revised shared processor information to show total
                      physical processors by processor type that were
                      shared, and added information for total logical
                      processors, by processor type.
                      Don Williams (UNC Hospitals, NC)

05/11/10  WLMDEFLT    Corrected CHKSMF (default should have been N).
                      Glenn Bowman (Wakefern Food Corp,, NJ)

05/11/10  WLM030U4    Corrected macro variable OBS304 to OBS30_4.
                      Don Williams (UNC Hospitals, NC)

06/23/10  DB2GUIDE    Corrected %LET BP_DESCRIPTION=N; to be %LET BP_DES=N;
                      in USOURCE(DB2GUIDE).
                      Thomas Grocke and Harald Seifert (HUK-Coberg, Germany)

06/23/10  WLM71S      Added test for SAS/ITRM before executing %sysfunct test for
                      presence of the TYPE71 file in the MXG pdb.
                      Thomas Grocke and Harald Seifert (HUK-Coberg, Germany)

6/26/10   DASEVAL1    Added FORMAT for &SMF74RMF and &SMF74INT to accommodate
                      SAS/ITRM uniqueue values in Germany.
                      Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)

6/26/10   WLMEVAL1    Specify FORMAT TIME12.2 for &SMF72int to avoid SAS WARNING
          WLMEVAL2    when using CPExpert with SAS/ITRM.
          WLMEVAL3    Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)
          WLMEVALF
          WLMEVALI
          WLMEVALJ
          WLMEVALL
          WLMEVALP
          WLMEVALQ
          WLMEVALS

6/29/10   WLMEVALC    Establish logic to handle case where specific system(s)
                      and times were selected and suppress findings from TYPE74SY
                      outside system(s) and times, but findings were made for some
                      interval for the selected data.
                      Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)

6/29/10   CICMXG4     Added logic to identify more CICS files that have APPLIDs
                      that are not in the CICS Dispatcher Statistics file.
                      Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)

6/30/10   WMQEVAL     Added HOUR computation based on WMQLOG data.
                      Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)

07/01/10  CIC145      Shortened Line 23 to prevent column 72 overrun (a problem
          WLM095      when a site has SAS option S2=value).
                      Wayne Hammond (Bank of America, GA).

07/01/10  WLMEVALQ    Added GENSELTM and associated code to allow normal selection.
                      Thomas Grocke and Harald Seifert (HUK-Coburg, Germany)

07/02/10  WLMLIST     Add %LET RULECAT=%TRIM(&RULECAT) to allow correct comparisons,
                      and reorder logic for setting RULECAT.
                      Rick Ralston (HUMANA, KY)

07/02/10  WLMEVALC    Establish logic to handle case where specific system(s)
                      and times were selected and suppress findings from TYPE74SY
                      outside system(s) and times, but findings were made for some
                      interval for the selected data.
                      Harald Seifert (HUK-Coburg, Germany)

07/05/10  DASCONFG    Added test for shared devices at EOF74.
                      Harald Seifert (HUK-Coburg, Germany)

07/13/10   WLMEVALF   Corrected %END location to be after CALL SYMPUT.
                      Wayne Hammond (Bank of America, GA).

07/14/10   WLMEVALP   Establish number local page data sets as a macro variable,
                      since the old maximum of 50 local page data sets was too
                      small (sites now have more than 50 local page data sets per
                      system).
                      Wayne Hammond (Bank of America, GA).

07/28/10   WLMEVALI   Revise logic for "dummy" control variables to yield proper
                      sort order in ODS html rule categories.
                      Rick Ralston (HUMANA, KY)

08/18/10   WLMEVALC   Compute TOTALMSG which was computed in WLM601 (now suppressed)
                      Rick Ralston (HUMANA, KY)

08/25/10   WLMMPLR    Added SAS ODS code.
           WLMCPUR    Rick Ralston (HUMANA, KY)

08/25/10   WLMRPTQ    Increased LINECT value.
                      Rick Ralston (HUMANA, KY)

09/14/10   WLMEVALQ   Corrected ENQ30_4 = OBS30_4.
                      Ahmet Alper Tecimer (Garanti Teknoloj, Turkey)

10/10/10   WLM094     Corrected OUTWLM macro parameter in continuation rules.
                      Ahmet Alper Tecimer (Garanti Teknoloj, Turkey)

10/12/10   GENLOG     Moved "dummy system" code to after GENSELTM selection tests,
                      otherwise logger analysis would not be done when specific
                      systems were selected for analysis.
                      Ahmet Alper Tecimer (Garanti Teknoloj, Turkey)